User`s manual

MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
.
Fax: [phone]
.
www.malighting.de
5454
5454
54
7.2 Remote via DMX input
7.2.1 Input signal
The male DMX 512 input XLR connector on the backpanel can be used to mix
the signals of any lighting console with the control data of the MA
SCANCOMMANDER and send them to the stage on one DMX line. For any
channel which is controlled from both consoles simultaneously, the two values
get compared and the highest level will be sent to stage.
In addition, up to 24 DMX 512 input channels can be used to remote control
single functions on the SCANCOMMANDER.
The pin layout for the DMX 512 input connector conforms with USITT protocol.
Pin 1 = Ground, Pin 2= Data - , Pin 3 = Data +
Daisy chaining a DMX
signal
Remote via DMX
EDIT
DELETE
SINGLE
DELETE
ALL
7.2.2 Assigning board functions
REMOTE button in the TOP MENU
DMX MENU
EDIT
- - -
22 MEM . A / 04
23 MEM . A / 05
34 MASTER A
40 MASTER B
--
SELECT
DMX 23
Encoder 1
Selection of one of the 24 squares (inverted)
Encoder 3
Selection of a DMX input channel.
List of input patches
Selection of an input
channel
Playback buttons (the same as on remote via touchboard)
Links the selected function to the selected DMX
channel.
DMX ON/OFF at the Remote top menu
Switches the remote input on and off.
Linking to one of the
playback functions
Activating and terminating
the remote input