User`s manual

MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
.
Fax: [phone]
.
www.malighting.de
1212
1212
12
Heading the first corner on the left
backside of stage with the beam (To be
sure to get the same corner points for
all the scans, the corners should be
marked on stage with white tape
crosses.)
! Attention !
button in the DISPLAY
Initializes the new movement. Changing to
the next scan without STORE will clear the
register of the corner positions.
! STORE !
As soon as the beam meets the corner
point,
SET
- button
stores the position in a temporary data
register. The mark " " shows, that
this corner was already adjusted.
Heading the second corner
SET
- button
SET
- button
Heading the third corner
SET
- button
Heading the fourth corner