Operating instructions

Pag. 8 http://www.coef.it - [e-mail]
MENU
FUNCTION SUB-FUNCTION DESCRIPTION
DMX
1 / 507 DV
1 / 505 DVP 8ch
1 / 504 DVP 9Ch
DMX start channel
TIME
LAMP
MACH
SHOW - KH, H
RST - GO?
SHOW - KH, H
Lamp working hours (KH=thousands H=hours)
Lamp working hours reset (confirm by ENTER)
Projector working hours (KH=thousands H=hours)
ERR
EOK
E110
E210
E220
E230
E240
E250
E260
E270 (only DVP)
W310
W410
NO ERROR
EEPROM failure
Malfunction of the SHUTTER motor
Malfunction of the COLOR motor/sensor
Malfunction of the GOBOS motor/sensor
Malfunction of the GOBOS ROT. motor/sensor
Malfunction of the PAN motor
Malfunction of the TILT motor
Malfunction ot the EFFECT wheel motor/sensor
Checksum Setup not valid
Lamp working hours for more than 1900 hours.
SHUT
HOME
TEST
HOME SHUTTER
TEST SHUTTER
COL
HOME
TEST
CSHUT
MODE
(*) OFF / ON
(*) MOD1 / MOD2
HOME COLOR
TEST COLOR
Color change in black-out position
Color switching or linear wheel motion
GOBO
HOME
TEST
GSHUT (*) OFF / ON
HOME GOBOS
TEST GOBOS
GOBO change in black-out position
RGOB
HOME
TEST
HOME GOBOS rotation
TEST GOBOS rotation
EFF
(only DVP)
HOME
TEST
HOME EFFECT wheel
TEST EFFECT wheel
REFF
(only DVP)
TEST TEST EFFECT rotation
PAN
HOME
TEST
STRV (*) STND / REV
HOME PAN movement
TEST PAN movement
Switch movement direction ( DX / SX)
TILT
HOME
TEST
STRV (*) STND / REV
HOME TILT movement
TEST TILT movement
Switch movement direction (UP / DOWN)
SCH CH1 / CH9 DVP CH1 / CH6 DV DMX value for the indicated channel
MISC
RSET
RDMX
DSPL
SWPT
CH8/9(onlyDVP)
VER
(*) YES / NO
(*) ON / OFF
(*) STND / REV
(*) STND / SWAP
(*)CH8/CH9
MASTER HOME (Starting RESET)
MASTER HOME via DMX control
Display on / Display off
180° rotation of the visualization display
Channel control switch PAN / TILT
Projector control (8 or 9 channels)
Show the installed software version.
5.1 MENU, FUNCTION & SUB-FUNCTION