Operating instructions

http://www.coef.net - [e-mail] Pag. 5
2.2 MACHINE INSTALLATION
To fix the Performance 250 DV/DVP is necessary, when the installation has to be on a raised-from-the ground
support, to block the fixing bracket of the unit by means of a screw provided with nut and locknut measuring not less
than M10X50, to insert in the central pre-arranged hole on the fixing bracket.
In order to guarantee a necessary security and in respect of the actual safety rules concerning the projectors’ in
-
stallation, it is compulsory to install a safety-chain (or steel cable), equipped with spring clips, to connect the Per
-
formance 250 DV/DVP‘s body to the fixing structure.
ATTENTION: the safety-chain must be properly installed and fixed to the supporting structure, in a way that an
incidental givin in of the main bracket would leed to the shortest possible fall of the projector. After such an inter
-
vention the safety-chain must be replaced.
ATTENTION: COEF is not responsible for installations not correctly made or made without respecting the
above indications: those installations are considered dangerous.
When you need to disassemble the fixing bracket of the Performance 250 DV/DVP, refer to figure to
re-assemble correctly the bracket with all its components, without damaging its functionality and secu-
rity.
•
Lamp MSD 250/2 - 2000 hours life - socket GY 9,5
•
6 metal and 2 dichroic rotating gobosall interchangeable and indexable position on 540°
•
Set of 10 extra metal gobos, given with the projector
•
1 diameter projection reducer
•
10 basic colors + white + 7 bi-colors
•
2 color conversion filters superimposing to the basic colors for a total of 33 colors + bi-colors (only DVP version )
•
Rainbow effect
•
Blacklite filter
•
2 rotating prisms : 3 facet and 6 facet (only DVP version )
•
Dimmer from 0 to 100% (only DVP version )
•
FROST Effect (only DVP version )
•
Adjustable strobe
•
Adjustable focus
•
Multifunctional display
•
Remote reset via DMX; selectable from display
•
Software Upgrade via DMX (with UNI-PROG 8 accessory)
•
Internal self-test with led indicator
•
Internal power factor correction
•
DMX 512 Standard
•
8/9 control channels (only DVP version )
PERFORMANCE 250 DV Code: 02A016
PERFORMANCE 250 DVP Code: 02A017
3.0 TECHNICAL NOTES
Power supply - Absorbed power
V~ Hz I W
230 50 1.8 400
230 60 1.7 380