Operating instructions
http://www.coef.net - info@coef.it Pag. 13
10.2 ELECTRONIC MAINTENANCE
This section is dedicated in detail to the electronic connections between the card and the me
-
chanical components, assembled in the projector. These informations will be absolutely necessary
when the mechanical unit has to be removed from the projector for maintenance and/or repair.
The connections are made using handy connectors and are detailed in figure where you can find
indications about the connection between a specific connector and a specific component of the me
-
chanical unit. This includes the motors and the sensors of the various effects wheels ( color, gobos,
prisms, shutter etc.).
WARNING!
An improper use of this documentation made by not specifically qualified staff can damage
irremediably the electronic and/or mechanical components of the projector.
1
GOBOS rotation motor
2 COLOR wheel motor
3 GOBOS wheel motor
4 SHUTTER motor 1
5 SHUTTER motor 2 (only DVP)
6 EFFECTS wheel motor (only DVP)
7 PRISM rotation motor (only DVP)
8 PAN movement motor
9 TILT movement motor
10 COLOR wheel sensor
11 GOBOS wheel sensor
12 GOBOS rotation sensor
13 EFFECTS wheel sensor (only DVP)
14 DMX input
15 Power IN
16 DipSwitch DV/DVP (S1)
SW 4 ON = DVP
SW 4 OFF= DV
16 - DipSwitch S1
ON
1234
5
6
3
4
1
2
1-2 12V.AC. 5
%
3-4 28V.AC. 5
%
5-6 28V.AC. 5
%
15 - Alimentazione / Power
+
+
+
-
-
-