COEF srl. Via Albinatico, 80-82 51019 Ponte Buggianese (PT) ITALY www.coef.it / www.coef.net PERFORMANCE 250 DV / DVP Realized by PC CAD & VIDEO info@coef.
ATTENTION: carefully read the directions of this manual. Exclusively follow the safety rules in force and do not carry out assembly and/or maintenance operations without taking all precautions as indicated in the different sections or without the necessary specialization. This manual must always accompany the equipment, therefore it must be available and readable at any moment if necessary.
We recommend you read the entire manual very carefully, particularly the sections concerning correct installation and safety procedures. This manual is an integral part of the supplied apparatus, therefore you are requested to keep it with care for future reference. This manual has been organized in order support the user, the installer or the maintenance operator of the described unit with those necessary informations for a correct use of the installation and working procedures of the same unit.
1.0 INSTALLATION The constructor is not be considered responsible in case of: • • • • • • • • • Improper use fo the unit or use by not trained staff Use in contrast with the directions on work safety Wrong installation Defective power supply Serious lacks in the necessary maintenance Unauthorized modifications and interventions Use of spare parts that are not original or not specific for the unit Total or partial inobservance of instructions Unusual events 2.
2.2 MACHINE INSTALLATION To fix the Performance 250 DV/DVP is necessary, when the installation has to be on a raised-from-the ground support, to block the fixing bracket of the unit by means of a screw provided with nut and locknut measuring not less than M10X50, to insert in the central pre-arranged hole on the fixing bracket.
4.0 - CONNECTIONS 4.1 - Power supply connections WARNING: In order to guarantee the utmost safety, connect the apparatus only to a properly earthed mains system. The projector is designed to work at the tension and frequency indicated by the electrical data label on the rear. Before connecting the projector to the mains, a qualified electrician must check its conformity.
5.0 SPECIAL FUNCTIONS AND PROJECTOR ASSIGNMENT On the front panel of Performance 250 DV/DVP you'll find a section for the additional functions and for setting the projector. Following the picture, you can see all the offered possibilities in detail. All operations are to be carried out with the F, G, E, D buttons, respectively indicated as MENU, ENTER, DOWN and UP. The display C will inform you about the selected functions. The 2 A, B, leds will allow you to know: A = reception of the DMX line.
5.
6.0 CH CHANNELS AND DIGITAL VALUES 6 CHANNELS (DV) MODE 1 2 MODE 2 9 CHANNELS (DVP) SHUTTER / STROBE 0 - 20 SHUTTER closed 21 - 50 STROBE Random 51 - 250 STROBE Speed adjustment 251 - 255 SHUTTER open SHUTTER / STROBE / DIMMER 0-5 SHUTTER closed 6-100 DIMMER adjustment 101-110 DIMMER 0 > 100% Automatic 6 sec. 111-120 DIMMER 100% > 0 Automatic 6 sec.
6 CHANNELS (DV) 8 CHANNELS (DVP) 9 CHANNELS (DVP) CH 3 GOBOS 0 - 10 11 - 20 21 - 30 31 - 40 41 - 50 51 - 60 61 - 70 71 - 80 81 - 90 91 - 100 101 - 110 111 - 120 121 - 130 131 - 140 141 - 150 151 - 160 161 - 170 171 - 180 181 - 193 194 - 205 206 - 230 231 - 255 Neutral GOBO 1 chann.4 controls rotation GOBO 2 chann.4 controls rotation GOBO 3 chann.4 controls rotation GOBO 4 chann.4 controls rotation Reduction GOBO 5 chann.4 controls rotation GOBO 6 chann.4 controls rotation GOBO 7 chann.
7.0 FOCUS ADJUSTMENT In order to adjust the objective, it is necessry to pre-set channels so that the shutter is open; assign the white colour and insert the selected gobo. Rotate the knob on the front part of the projector which is highlighted by the writing FOCUS (see the picture) and adjust the focusing device of the objective, positioning the projector wherever you wish. 8.0 LAMP ADJUSTMENT Lamp adjustment is necessary to obtain a uniform and powerful light beam.
10.0 ORDINARY MAINTENANCE WARNING: switch off the projector before operating. Ordinary maintenance on the projectors PERFORMANCE 250 DV/DVP is necessary to maintain the perfect efficiency of the unit and to avoid defects like the low luminosity of the light beam, irregular motion of the mirror or other rotating components. In the figures you can see those components that can easily accumulate dust and grease. Clean them using a soft cloth and common glass-cleaners.
10.2 ELECTRONIC MAINTENANCE This section is dedicated in detail to the electronic connections between the card and the mechanical components, assembled in the projector. These informations will be absolutely necessary when the mechanical unit has to be removed from the projector for maintenance and/or repair.
11.0 TROUBLESHOOTING PROBLEM CAUSE The projector doesn’t swich on The projector swiches on but doesn’t answer to commands ACTION - The power supply is not present - The lamp is not working - The thermal switch is active Check if the luminous indicator is lighted or not. Replace the lamp. Just to wait for little of time - Wrong DMX configuration Make sure that the projector is correctly configurated. Replace or repair the DMX cable.
