User`s guide
14
Emulation Manual
Modify a Cuelist
To change an existing cuelist, open the CUE menu. Select a Cuelist and click EDIT to open the Cuelist editor. Here you can edit
the properties of the CUELIST and the individual cues..
Cuelist Properties
The following properties can be set for the cuelist:
Fader Start
With Fader start enabled, the cuelist will automatically be triggered when the corresponding playback fader is being moved
up or the ash button is pressed. The cuelist will also be released as soon as the fader is back at the bottom or when the ash
button is released.
Chase
When CHASE is enabled, the cuelist will no longer follow the cues’ timings and conditions. The cuelist will be played back as a
chase. The crossfade can be changed using the ATTAK slider. The speed of the chase is linked to the main Chase tempo, which
can be found at the bottom left of the Emulation window. All cuelists set to CHASE will run synchronous to this tempo.
In the Cuelist Editor, you can also specify a tempo divider for the chase.
1/1: Chase will step further on every beat of the main chase tempo.
1/2: Chase will step further once in every 2 beats of the main chase tempo.
1/4: Chase will step further once in every 4 beats of the main chase tempo
Etc.
Speed
Speed controls the playback speed of the cuelist. 100% reects normal playback speed, with the programmed timing per cue.
Changing the playback speed will scale the timing for all cues in the cuelist.
6 Modify a Cuelist