User`s manual

Codonics Virtua User’s Manual 11-19

Device Status and

Troubleshooting

7. Touch the

Calibrate

button.

Calibration status messages are displayed in the Dashboard. The

robotic disc transport will attempt to execute the operation,

according to the calibration type selected in step 4.

8. Watch the execution of the operation to verify whether the

alignment has been corrected. Repeat the calibration value

adjustment until the operation is performed successfully.

9. When the calibration completes successfully, touch the

Done

button to save the new calibration settings.

NOTE:

You can also touch the

Cancel

button at any time to discard the calibration setting

changes.