User`s manual

4-2 Sending Studies to Virtua
• DICOM AE Title. The device uses the Called AE Title from the
DICOM host to control the media type (CD or DVD), content, and
printed label on the disc. For more information on how the
device uses Called AE Titles, refer to “Sending Studies to Record
to Disc” below.
Most DICOM hosts require these settings to successfully connect to
the device. Specific details about how to configure a host are
usually found in the product’s documentation. Codonics Technical
Support also has information about how many systems are
configured.
DICOM Store is the primary method used to send radiographic
studies to the device.
How a study will be recorded to disc is controlled by specifying
preset combinations of job settings stored in the device, called Job
Profiles . The device makes each Job Profile available to the DICOM
Store user as a Called AE Title. The DICOM Store user can then pick
the Called AE Title that corresponds to the Job Profile to be used for
a particular study recording job.
The device provides the following standard Job Profile AE Titles:
• Auto. Auto mode records the studies for one patient on a set of
study discs. This allows for completely unattended recording and
labeling of discs.
Sending Studies to Record to Disc