User`s manual


11. Select the printer model to install. Select the
“Codonics EP-1000” printer, then click [ Next>] to
continue.
12. Replace existing driver if prompted. The
following dialog box will appear only if the EP-
1000 print driver has been previously installed on
this PC. Select option “Replace existing driver” if
this dialog box appears. Click [ Next> ] to continue.
13.Enter the Printer Name and set as the default
printer. It is recommended to use the default
printer name “Codonics EP-1000”. Most users will
want to make this printer the default printer by
selecting “Yes”. Refer to the dialog box below. Click
[ Next> ] to continue.
14.Do not share this printer. It is recommended to use
the option “Not shared” as shown below. Click [
Next> ] to continue.