User`s manual


7. Automatic launch of the Add Printer Wizard. The
installer will automatically start the Windows
“Add Printer Wizard.” Click on “My Computer”
as shown below and then click [ Next> ].
8. Select the EPR1: port. The EPR1: port is
automatically created at the beginning of the
installation procedure. Scroll through the list of
ports under the section “Available ports:”.
Select “EPR1: (Codonics EP-Series Port Monitor)”.
Click [ Next> ] to continue
.
9. Select “Have Disk” to specify print driver
location. The location of the print driver is
specified by clicking the button [ Have Disk… ].
Do not
select from the list of Manufacturer’s and
Printers in the dialog box. Only use the [ Have
Disk…] button.
10.Enter the location of the print driver. Type the
directory name that contains of the print driver.
The driver location is:
C:\CODONICS\driver\nt4.
Click [ OK ] after typing the directory as shown in
the dialog box below.