User guide
PAGE 7
CODEX TRANSFER STATION FOR MAC OSX - PROCESSING ARRIRAW REV 11.14.12
Next choose the Source shots for the ALE. This is normally done per Roll, so open the drop down list to set Source shots to Specied roll and
then choose the Roll from the list:
Then click DO IT to create the ALE le.
Now you have a record of all the original metadata for reference.
Filtering the Shot Table
It is possible to have more than one Codex storage media loaded at the same time (e.g. a Capture Drive and the Internal Storage disks).
In this case it can be useful to lter the Shot Table, so you can only see shots on a chosen media location.
Click the Filter icon (spyglass) on the left of the MAIN tab, and then open the Datapack drop down list to make a selection:
The physical location for these settings is shown below: