Troubleshooting Guide

Smoke Alarm Troubleshooting Guide
SOLUTIONCAUSEPROBLEM
© NEWFIELD GROUP July 2017
Smoke alarm does not respond
when Test button depressed.
Red LED flashes and the alarm
sounds one beep every 45
seconds.
Smoke alarm sounds unwanted
alarms intermittently or when
residents are cooking, taking
showers, etc.
Battery not connected.
Battery is flat.
Battery is low.
1. Alarm has dust or
insect inside casing.
2. Alarm is incorrectly
located.
Check that the battery is inserted correctly.
Replace the battery.
Replace the battery.
1. Clean the alarm by gently vacuuming all
openings around the outside of the alarm using
your household vacuum's soft brush attachment.
2. Move alarm away from kitchen or
bathroom/laundry areas where cooking fumes or
steam can trigger the alarm.
Model: CRG-100
User Guide: https://goo.gl/JjNqJc