User Manual

Flashing
※
6.Pairing the Headphone with the Sound Collector
1/2
Important
The wireless connection distance between headphones and Sound Collector
This product allows you to listen to the sound collected by the Sound Collector
on CODEON headphones. Transmission distance: Max-range 10M (no obstructions).
If the paring action failed, please refer to the following operations.
・Press and hold the power button for 3 seconds.
・When the power is successfully turned on, the LED light will
flash blue quickly to
indicate that the device is in the pairing mode.
♪ ~ "Power on"
♪~「Connected」
・Press and hold the power button for 3 seconds.
・When power-up, there will be a “
power on” prompttone and the LED light
will
flash blue quickkly to indicate that the device is in the pairing mode.
1. Headphone power switch
3. Wait for about 10 to 30 seconds to complete the pairing.
2. Sound Collector power switch
The led light is
flashing blue quickly
Press and hold the power button for 3 seconds
Flashing blue
every 3 seconds.
On the next pairing, the pairing action will be completed more quickly.
Turn off the power when you have finished using it.
Flashing blue
every 3 seconds.
・The time between standby and successful connection is about 10-30 seconds.
The CONDEON headphones will give a "connected" prompt tone.
The LED light of the CONDEON headphones will change from
flashing rapidly
to flashing blue every 3 seconds.
・The LED light of the Sound Collector will change from
flashing rapidly to
flashing blue every 3 seconds.
Pairing is completed when the indicator light flashes every 3 seconds.
When headphones are turned off, there will a prompt tone "power off".
The LED light of the headphones will also be off.
When the Sound Collector is turned off, the headphones will prompt
"disconnected".
Press and hold the headphone power button for 3 seconds and the
headphones will be turned off.
When the LED light is on,
release the power button.
Flashing
The led light is
flashing blue quickly
Press and hold the power button for 3 seconds
6.Pairing the Headphone with the Sound Collector
2/2
Important
※ When the LED light is on,
release the power button.
Press and hold the power button of Sound Collector for 3 seconds to turn
it off. The LED light will also
be off when the power is turned off.
・Please turn off the power of headphones and Sound Collector and repeat
steps 1.to 3. Also, please wait for a period of time in pairing standby state
( LED fast flashing).
・It is possible that the Headphones or Sound Collector has low battery.
Please charge the battery as described in 9. "Charging Method" and
repeat steps 1. to 3.