User guide

ManualsBrandsCodelocks ManualsSafetyKL1000 KitLock Locker Lock

MASTER CODE COMMANDS

DELETE SUB-MASTER CODE

#Master Code

•

••

Example: #55443322

•

••

Result

Sub-Master Code deleted

CHANGE THE MASTER CODE

#Master Code

•

New Master Code

•

New Master Code

••

Example: #55443322

•

12345678

•

12345678

••

Result

Master Code has been changed to 12345678

SET OR CHANGE THE USER CODE

#Master Code

•

User Code

••

Example: #55443322

•

9999

••

Result

New User Code 9999 now operative

DELETE USER CODE

#Master Code

•

••

Example: #55443322

•

••

Result

User Code deleted

SET OR CHANGE THE SUB-MASTER CODE

#Master Code

•

Sub-Master Code

•

Sub-Master Code

••

Example: #55443322

•

87654321

•

87654321

••

Result

Sub-Master Code 87654321 now operative

SET OR CHANGE THE USER CODE

#Sub-Master Code

•

User Code

••

Example: #87654321

•

6666

••

Result New User Code 6666 now operative

USER CODE COMMANDS

DELETE USER CODE

#Sub-Master Code

•

••

Example: #87654321

•

••

Result User Code deleted

CHANGE THE SUB-MASTER CODE

#Sub-Master Code

•

New Sub-Master Code

•

New Sub-Master Code

••

Example: #87654321

•

10101010

•

10101010

••

Result Sub-Master Code has been changed to 10101010

SUB-MASTER CODE COMMANDS

CHANGE THE USER CODE

#User Code

•

New User Code

•

New User Code

••

Example: #0099

•

6688

•

6688

••

Result User Code now 6688

SPECIAL MASTER CODE COMMANDS

SET SINGLE USE MODE B) (LOCKER MODE)

#Master Code

•

••

Example: #55443322

•

••

Result The lock will now remain open until the next single use code is entered

into the lock as follows:

Step 1 – Enter 4 digit code

•

Conrm 4 digit code

••

Close the locker which will now be locked.

Step 2 – Enter the same 4 digit code

••

the lock will now open and remain

open until next 4 digit code is entered. Note: When locked in this mode

•

LED will ash every 5 seconds to indicate the locker is locked.

SET TECHNICIAN CODE

#Master Code

•

Technician Code

•

Technician Code

••

Example: #55443322

•

555555

•

555555

••

Result The lock is automatically set into function B) single use Locker Mode

AND allows the programmed Technician Code to open the lock WITHOUT the

entered single use code being erased.

Note: If lock is opened with a Master Code the User Code will be erased.

SET REPEATED USE MODE A)

#Master Code

•

••

Example: #55443322

•

••

Result The lock will revert back to default function A) repeated use.

Factory set User Code 0099 will now work repeatedly until reprogrammed.

PROGRAMMING

OPERATING

INSTRUCTIONS

FOR RIGHT HAND

HORIZONTAL

KITLOCK1000

CODELOCKS LTD UK

Tel: +44 (0) 1635 239645

Fax: +44 (0) 1635 239644

sales@codelocks.co.uk

Helpline, service & spares

FREEPHONE 0800 393 405

CODELOCKS INC US

Tel: +1 714 979 2900

Fax: +1 714 979 2902

sales@codelocks.us

Help: 1.877.CODELOCK

www.codelocks.com

WWW.KITLOCK.COM

POI-KL1000RH-0912

Summary of content (2 pages)

PAGE 1
CHANGE THE MASTER CODE • • • •• Example: #55443322 • 65 • 12345678 • 12345678 •• 65 #Master Code New Master Code New Master Code Result Master Code has been changed to 12345678 SUB-MASTER CODE COMMANDS CHANGE THE SUB-MASTER CODE SET REPEATED USE MODE A) #Sub-Master Code #Master Code • 68• New Sub-Master Code• New Sub-Master Code •• Example: #87654321 • 68 • 10101010 • 10101010 •• Result Sub-Master Code has been changed to 10101010 SET OR CHANGE THE USER CODE • 60• User Code•• Example: #55443322
PAGE 2
OPERATING INSTRUCTIONS CODES - THE BASICS • The KitLock has four code levels available: i) Master Code ii) Sub-Master Code iii) User Code iv) Technician Code • The KitLock is supplied with two factory set codes: Master Code: 55 44 33 22 User Code: 00 99 • When fitted immediately change the Master Code and User Code. • All Master Codes and SubMaster Codes are 8 digits long. • All User Codes are 4 digits long. • The lock ‘open’ time is set at 4 seconds.