Manual

MASTER CODE COMMANDS
DELETE SUB-MASTER CODE
#Master Code
•
58
•
58
••
Example: #66778899
•
58
•
58
••
Result
Sub-Master Code deleted.
CHANGE THE MASTER CODE
#Master Code
•
56
•
New Master Code
•
New Master Code
••
Example: #66778899
•
56
•
12345678
•
12345678
••
Result
Master Code has been changed to 12345678.
SET OR CHANGE THE USER CODE
#Master Code
•
51
•
User Code
••
Example: #66778899
•
51
•
9999
••
Result
New User Code 9999 now operative.
DELETE USER CODE
#Master Code
•
57
••
Example: #66778899
•
57
••
Result
User Code deleted.
SET OR CHANGE THE SUB-MASTER CODE
#Master Code
•
52
•
Sub-Master Code
•
Sub-Master Code
••
Example: #66778899
•
52
•
87654321
•
87654321
••
Result
Sub-Master Code 87654321 now operative.
SET OR CHANGE THE USER CODE
#Sub-Master Code
•
59
•
User Code
••
Example: #87654321
•
59
•
6666
••
Result New User Code 6666 now operative.
USER CODE COMMANDS
DELETE USER CODE
#Sub-Master Code
•
54
••
Example: #87654321
•
54
••
Result User Code deleted.
CHANGE THE SUB-MASTER CODE
#Sub-Master Code
•
53
•
New Sub-Master Code
•
New Sub-Master Code
••
Example: #87654321
•
53
•
10101010
•
10101010
••
Result Sub-Master Code has been changed to 10101010.
SUB-MASTER CODE COMMANDS
CHANGE THE USER CODE
#User Code
•
New User Code
•
New User Code
••
Example: #1122
•
6688
•
6688
••
Result User Code now 6688.
SPECIAL MASTER CODE COMMANDS
SET SINGLE USE MODE B) (LOCKER MODE)
#Master Code
•
12
••
Example: #66778899
•
12
••
Result The lock will now remain open until the next single use code is entered
into the lock as follows:
Step 1 – Enter 4 digit code
•
Conrm 4 digit code
••
Close the locker which will now be locked.
Step 2 – Enter the same 4 digit code
••
the lock will now open and remain
open until next 4 digit code is entered. Note: When locked in this mode
•
LED will ash every 5 seconds to indicate the locker is locked.
SET TECHNICIAN CODE
#Master Code
•
00
•
Technician Code
•
Technician Code
••
Example: #66778899
•
00
•
555555
•
555555
••
Result The lock is automatically set into function B) single use Locker Mode
AND allows the programmed Technician Code to open the lock WITHOUT the
entered single use code being erased.
Note: If lock is opened with a Master Code the User Code will be erased.
SET REPEATED USE MODE A)
#Master Code
•
13
••
Example: #66778899
•
13
••
Result The lock will revert back to default function.
Factory set User Code 1122 will now work repeatedly until reprogrammed.
PROGRAMMING
OPERATING
INSTRUCTIONS
FOR LEFT HAND
HORIZONTAL
KITLOCK1000
CODELOCKS LTD UK
Tel: [phone]
Fax: [phone]
[e-mail]
Helpline, service & spares
FREEPHONE 0800 393 405
CODELOCKS INC US
Tel: [phone]
Fax: [phone]
[e-mail]
Help: 1.877.CODELOCK
www.codelocks.com
WWW.KITLOCK.COM
POI-KL1000LH-0912