Manual

2
CHECK THAT THE CONTENTS OF YOUR BOX ARE CORRECT ACCORDING
TO THE MODEL
1 Front plate and handle
2 Back plate and handle
3 Neoprene seals x 2
4 RED & BLUE tipped spindles
5 Fixing bolts x 4 (1 x spare)
6 Front plate cylinder cover
7 Allen keys x 2
8 Euro profile cylinder escutcheons
8a Keyhole escutcheons
9 Mortice latch, strike & 4 screws
10 2 bolt mortice lock and strike
11 Double Europrofile cylinder & 3 keys
12 Code change keys
13 Adaptor kit for mortice locks
with horizontal fixings
14 Latch support post
15 Code change tool
■ Installation template
■ Code change instructions
■ Code card
■ Fire Kit (optional)
(See page 13)
TOOLS REQUIRED
■ Power drill
■ Drill bit 30mm (1
3
/16”)
25mm (1”)
20mm (
3
/4”)
16mm (
5
/8”)
10mm (
3
/8”)
■ Phillips screwdriver
■ Chisel 22mm (
7
/8”)
■ Chisel 25mm (1”)
■ Hammer/mallet
■ Stanley knife
■ Adhesive tape, pencil, bradawl,
tape measure
Model 600/605 Model 610/615 Model 620/625
• • •
• • •
• • •
• • •
• • •
• • •
• • •
1 pair – 1 pair
1 pair – –
– • –
– • –
– – •
– – •
• • •
• – –
– • –
• • •
• • •
• • •
• • •
• • •
– • –
– • –
– – •
– – •
• • •
• • •
– – •
– • •
– • •
– • •
– • •
BOX CONTENTS
N.B. When installing on a fire door, please see instructions on page 12.
For Back to Back and Panic Kit versions, please see instructions on page 14.
CL600_Installationspage2c.pdf 26/07/2012 14:31:19