Specification Sheet
www.codelocks.com
Scan to
shop!
PRODUCT DIMENSIONS
TECHNICAL SPECIFICATIONSLOCK MODELS
FEATURE DESCRIPTION
Spindle Type Two part
1
/
4
” (6mm) spring loaded spindle
Material Zinc Alloy
Finish Color Stainless Steel
Non Handed Locks will t doors hung on the left or right
Door Thickness 1
3
/
4
” - 2
3
/
16
” (45mm - 55mm)
Door Material Aluminum
Codes 8,191 non sequential code combinations available
Code Storage Single Code
Buttons 14 stainless steel buttons
Install Options Vertical only
Suitable For Interior and exterior use
Keyed Alike Locks can be supplied keyed alike on request
Front and Back Plates
Narrow stile Codelock complete
with cams and lever handles.
CL460 / CL465
CL460
CL465
Code Change Method
Requires removal of the lock from the door. The code can be changed by
repositioning the tumblers in the code chamber. Locks are supplied with a
random code commencing with the ‘C’ clear button.
Passage Function
The CL465 model provides a passage function. These models feature a black
dot on the ‘Y’ button. When the ‘Y’ button is pressed along with a correct code
input, the lever will retract the latch freely until disabled.
ADDITIONAL FEATURES
Latch Options
The CL460 and CL465 models are designed as a retrot for Adams Rite
4510 lockcase or similar style ANSI round cylinder mortise deadlatches.
*Codelocks mechanical locks oer a limited lifetime warranty and will be repaired, service or replaced free of charge if they develop a manufacturing fault. Faults caused by misuse, abuse and/or poor tting are not covered under warranty.
All our door locks (excluding the CL50, CL160, CL200 and CL2000 which comes with dual backset) come with 2
3
/
4
” standard backset. 2
3
/
8
” backset can be substituted upon request at no additional charge. © 2019 Codelocks Ltd. All rights reserved.
Not
Supplied