Installation Guide

Box Contents
Check the contents of the box are correct
according to the model 4010 2010 4020 2020
1 Front Plate • • • •
2 Lever Handles (x2) • - • -
3 Knob Handles (x2) - • - •
4 Back Plate • • • •
5 Gaskets (x2) • • • •
6 Sprung Spindle • • - -
6a Split Spindle (x2) - - • •
7 1.5v AA Batteries (x4) • • • •
8 Philips Head through Fixing Bolts (3) • • • •
(1 spare)
9 Allen Keys • • • •
10 2x Cable connections for REM 1 and REM 2 • • • •
11 Mortice Latch, Strike & 4 screws • • - -
12 Latch Support post • • - -
13 2 Bolt Mortice lock & Strike - - • •
14 Double Europrofile Cylinder & 3 Keys - - • •
15 Europrofile Cylinder Escutcheons • • • •
15a Keyhole Escutcheons • • - -
This box should also contain an Installation Template and Programming Instructions.
• Power Drill
• Drill bits 25, 16, 12 & 10mm
• Philips screwdriver
• Hammer / mallet
• Chisel 25mm
• Stanley knife
• Adhesive tape, pencil,
bradawl, Tape measure
• Pliers and hacksaw for
cutting bolts
Tools Required
Box Contents
15a15
14
13
12
11
10
9
8
7
6
6a
54
3
2
1
2 3
2K_4K Installation.indd 2-3 1/3/05 4:26:04 pm