User manual

D013597_02_CR3600_User_Manual
Fuel Gauge Buon
5.0 - Fuel Gauge Baery Status Indicators
Check the Baery Life
Press the fuel gauge buon (Figure 11) to determine remaining baery life. If the baery has less then 10% capacity, the rst LED will
ash rapidly. For 25% or greater capacity, the LEDs will ash ON for 4 seconds.
3
Fuel Gauge Status Indicator While Charging
If the baery has less then 10% capacity, the rst LED will ash rapidly while charging. For 25% or greater capacity, the LEDs will ash
ON for 4 seconds.
Fuel Gauge Indicators
6.0 - Powering On/O the Reader
Press and hold either buon located on the right or le of the arrow keys, or the trigger on handled conguraons (Figures 12 and 13),
for one second, to power on reader. The CR3600 will beep, vibrate and the LEDs will ash to indicate it is on and ready for use.
Baery Life Fuel Gauge Indicators
<10%
(Flashes Rapidly)
<25%
25-50%
50-75%
75%+
Figure 11
Figure 13
Figure 12
Figure 13
7.0 - Targeng the CR3600
Make sure the CR3600 screen is at the Ready prompt, hold the CR3600 4-8 inches away from the barcode and press one of the
power/scan buons or the trigger (Figure 14). The CR3600 will display data from the scanned barcode on its screen. (Figure 4)
The CR3600 will beep, vibrate and the good read indicator (Figure 19) will ash green
to indicate a ‘good read’ has occurred.
Figure 14