User manual

D013597_02_CR3600_User_Manual
3.0 - Baery Installaon and Removal
Place the baery into the reader as shown below. (Figure 6) Once in place, the baery will snap and lock to indicate proper
installaon. For baery removal, slide the latch (Figure 7), to unlock and release the baery.
Latch
4.0 - Charging the CR3600
1. Plug the USB cable into the computer’s USB port (Figure 8) or the power adapter into the wall outlet. (Figure 9)
2. Remove the plasc ‘Remove Before Use’ cap and place the reader into the Charging Staon. (Figure 10)
Note: Baeries ships with approximately 50%
baery life and should be completely charged before
inial use. Approximate me to charge a depleted
baery is 4 hours via USB cable, and 2 1/2 hours via
AC power supply.
2
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10