User manual

D013597_02_CR3600_User_Manual
19.0 - Reading Ranges
CR3600 Performance
Test Barcode Min Inches (mm) Max Inches (mm)
3 mil Code 39 3.1” (80 mm) 4.0” (102 mm)
7.5 mil Code 39 1.3” (33 mm) 7.2” (182 mm)
10.5 mil GS1 DataBar 0.8” (20 mm) 8.7” (220 mm)
13 mil UPC 1.1” (28 mm) 11.0” (280 mm)
5 mil Data Matrix 1.7” (43 mm) 4.5” (115 mm)
6.3 mil Data Matrix 1.3” (33 mm) 5.9” (150 mm)
10 mil Data Matrix 0.8” (20 mm) 7.1” (180 mm)
20.8 mil Data Matrix 1.1” (28 mm) 13.5” (343 mm)
Note: working ranges are a combinaon of both the wide and high density elds. All samples were high quality barcodes
and were read along a physical center line at a 10° angle. Default AGC sengs were used. Accuracy= +/- 10%.
10
Important Note If Using a non-Code Bluetooth Device:
To connect to a Bluetooth device not manufactured by Code, you will need the Bluetooth address (oen referred to as the BD_ADDR)
of that device. The 12-character Bluetooth address can be found on the device near the serial number. Then visit Code’s website at:
hp://www.codecorp.com/bdaddr.php and enter the 12-character address to create the QuickConnect Code.
You will need to locate the Communicaons (COM) Port assigned to the Bluetooth serial port protocol before installing the Bluetooth
Conguraon Manager soware that is included with your Bluetooth adapter (e.g., COM 10). This is the COM Port through which the
CR3600 will connect.
Blue LED
Figure 35
Figure 36
18.0 - Establishing a Bluetooth® Connecon
1. If establishing a Bluetooth connecon using the Charging Staon with embedded CodeXML® Modem, slide the Communicaon
Mode Switch on the Charger/Modem Staon (Figure 33), to Bluetooth mode (the direcon of the arrow).
2. Scan the QuickConnect Code located on the front of the Charging Staon with embedded CodeXML® modem or on the external
CodeXML® M3 Modem (Figures 34 and 35).
3. The wireless icon located at the top of the reader will ash as it aempts to make connecon (Figure 36). The blue LED on the
charging staon or CodeXML® M3 Modem (Figures 35 and 36) will also ash as it aempts to connect. The blue LED will turn
solid when connecon is established, the CR3600 will beep once and the wireless icon will ash every 10 seconds.
For addional CodeXML® M3 Modem conguraon informaon, please reference the CodeXML® M3 Modem QuickStart Guide.
Storage Icon
Connecon Icon
QuickConnect Code
Blue LED
Wireless Icon
Good Read
Indicator
Communicaon
Mode Switch
Figure 33 Figure 34
Baery Charge
Indicator