Technical information

10/29/2014
Page 53 of 72
© 2014 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  [phone]  FAX [phone]
Reg
Setting Name
Default
(Hex)
Comment
25E
Connection Delay (ms) –
Bluetooth Keyboard
0
This is the additional amount of time that the reader will wait after
connecting before sending data. The delay will only be used with
the associated communication mode.
Note: Supported in firmware version 570+
270
Requested Download
Memory Allocation Size
0
This is the optimal amount of memory to allocate for the current
file download to the reader.
271
Connection Delay (ms) –
iAP2 External Accessory
mode
0
This is the additional amount of time that the reader will wait after
connecting before sending data. The delay will only be used with
the associated communication mode.
Note: Supported in CR4405 firmware version 622+
272
Connection Delay (ms) –
iAP2 Keyboard mode
0
This is the additional amount of time that the reader will wait after
connecting before sending data. The delay will only be used with
the associated communication mode.
Note: Supported in CR4405 firmware version 622+
273
Max Error Log Size
(bytes)
C8 * 1000
((#200) *
(#1024))
This is the maximum size of the error log in bytes. It will not exceed
it by more than the size of one error log entry.
274
Error Log Truncation
Percent
46
(#70)
When the error log exceeds the maximum length, it will be
truncated to this percentage of its maximum size
277
Max Motion Brightness
Percent
3C
(#60)
Note: Supported in firmware version 655+
278
Low Battery Sleep
Voltage (mV)
0
CR4405:
C1C
(#3100 )
The reader will automatically sleep when the battery voltage is
below this threshold.
Note: Supported on CR4405 only.
279
Low Battery Sleep
Wakeup Voltage (mV)
0
CR4405:
ED8
(#3800)
If the reader automatically sleeps because of a low battery, it will
wake automatically if the battery voltage goes above this level.
Note: Supported on CR4405 only.
27B
Cabled Event
0
CR4405:
E1
(#225)
This event will be triggered when the reader is connected via a
cable.
Note: Supported on CR4405 only.
See register C4 for a list of events
27C
Uncabled Event
0
CR4405:
DE
(#222)
This event will be triggered when the reader is disconnected from
its cable.
Note: Supported on CR4405 only.
See register C4 for a list of events