Technical information

10/29/2014
Page 52 of 72
© 2014 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  [phone]  FAX [phone]
Reg
Setting Name
Default
(Hex)
Comment
250
Korean Post Symbology
0
0: Disabled
1: Enabled
251
Background Transmit
Enable
1
CR4405:
0
Enables use of background transmit feature. With this enabled,
user may be able to scan barcode labels faster than the reader or
modem can output the data to the host.
Note: Supported in firmware versions 0449+.
256
Decoding Options
10
(#16)
CortexDecoder decoding options. (DPM license supported in
CD13.2.11+)
Binary Dip Switch
Bit
Controls
Value
0
Reserved
1
Basic Laser DPM
0: Disabled
1: Enabled
2
Basic inkjet/dot peen DPM
0: Disabled
1: Enabled
4
Low Contrast 1D
0: Disabled
1: Enabled
5
Dot peen dark on light (need
DPM license)
0: Disabled
1: Enabled
6
Dot peen light on dark (need
DPM license)
0: Disabled
1: Enabled
7
Laser/chem etch
(need DPM license)
0: Disabled
1: Enabled
8
Reserved
25B
Bluetooth Keyboard
Discoverable Time (sec)
1E (#30)
The time that the reader will be discoverable to other Bluetooth
devices when discoverable command is sent to the reader (see
Section 12.1 for more info on discoverable command)
Note: Supported in firmware version 570+
25D
Disconnect when Set
Discoverable
1
Disconnect on set discoverable (see Section 12.1 for more info on
discoverable command)
0 – Do not disconnect when discoverable
1 –Disconnect when discoverable
Note: Supported in firmware version 570+