Technical information

10/29/2014
Page 49 of 72
© 2014 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  [phone]  FAX [phone]
Reg
Setting Name
Default
(Hex)
Comment
236
Uncradled event
0
CR2300:
CR2600:
CR3600:
CR4405:
DF
(#223)
This event will be triggered when the reader is removed from its
cradle.
Note: Supported in firmware version 376+
See register C4 for a list of events
243
Connection Delay (ms) –
USB KB
0
CR2300:
CR3600:
CR2600:
CR4405:
1388
(#5000)
This is the additional amount of time that the reader will wait after
connecting before sending data. The delay will only be used with
the associated communication mode.
Note: Supported in firmware version 376+
244
Connection Delay (ms) –
USB HID
0
This is the additional amount of time that the reader will wait after
connecting before sending data. The delay will only be used with
the associated communication mode.
Note: Supported in firmware version 376+
245
Connection Delay (ms) –
USB VCOM
0
This is the additional amount of time that the reader will wait after
connecting before sending data. The delay will only be used with
the associated communication mode.
Note: Supported in firmware version 376+
246
Connection Delay (ms) –
USB HIDPOS
0
This is the additional amount of time that the reader will wait after
connecting before sending data. The delay will only be used with
the associated communication mode.
Note: Supported in firmware version 376+
247
Connection Delay (ms) –
Bluetooth
0
This is the additional amount of time that the reader will wait after
connecting before sending data. The delay will only be used with
the associated communication mode.
Note: Supported in firmware version 376+
249
Connection Delay (ms) –
UART
0
This is the additional amount of time that the reader will wait after
connecting before sending data. The delay will only be used with
the associated communication mode.
Note: Supported in firmware version 376+