Technical information

10/29/2014
Page 43 of 72
© 2014 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  [phone]  FAX [phone]
Reg
Setting Name
Default
(Hex)
Comment
CE
Codablock F Symbology
0
0: Disabled
1: Enabled
Note: This register has no effect on a CR900FD without the proper
2D barcode decoding license.
CF
Macro PDF417
Symbology
0
0: Disabled
1: Enabled
Note: This register has no effect on a CR900FD without the proper
2D barcode decoding license.
Also see registers: 29, 2A
D8
Composite Codes
Require Both Elements
1
0: Accept any composite element
1: Only accept composite codes if both elements could be decoded.
Also see registers: 34, 4A, DB
D9
Max Connection Wait
Time
CR2300:
CR2600:
CR3600:
0F (#15)
CR4405:
5
Valid Range: 0 to 7FFFFFFF Seconds
The Reader will attempt connection for up to this amount of time
when a connection is explicitly requested, such as when a
QuickConnect code is read or an upload is requested (by event or
command).
Note: Only applies to readers using Bluetooth communication
modes.
DB
Merge Selected
Decodes
0
0: Disabled
1: Enabled
When enabled, multiple valid decodes from a single read are
concatenated. This includes Composite codes or when multiple
barcode reading is enabled.
Also see registers: 34, 4A
E3
Trigger 1 Confirmation
Time (ms)
0
Valid Range: 0 to 7FFFFFFF Milliseconds
The trigger input must be asserted for this amount of time before
the trigger event is generated. Setting this value > 0 makes it easier
to select combinations of triggers (e.g. trigger 3, which is trigger 1 &
2 asserted together).
E4
Trigger 2 Confirmation
Time (ms)
0
Valid Range: 0 to 7FFFFFFF Milliseconds
The trigger input must be asserted for this amount of time before
the trigger event is generated. Setting this value > 0 makes it easier
to select combinations of triggers (e.g. trigger 3, which is trigger 1 &
2 asserted together).