Technical information

10/29/2014
Page 34 of 72
© 2014 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  [phone]  FAX [phone]
Reg
Setting Name
Default
(Hex)
Comment
6E
Interleaved 2 Of 5
Symbology
1
0: Disabled
1: Enabled
Also see registers: 71, C9
6F
Codabar Symbology
1
0: Disabled
1: Enabled
70
Code 39 Checksum
0
Binary Dip Switch
Bit
Controls
Value
0
Code 39 Checksum Checking
0: Disabled
1: Enabled
1
Strip Checksum From Output
0: Disabled
1: Enabled
Also see register: 6B
71
Interleaved 2 Of 5
Checksum
0
0: Disable checksum checking
1: Enable checksum checking
2: Enable checksum checking and strip the checksum from the
result string
Also see registers: 6E, C9
72
Auto Stored Data Erase
(Auto Log Erase)
1
0: Disable
1: Enable
Note: When Enabled, data and images are cleared from nonvolatile
memory when they are successfully uploaded to the Host. (In “Log
mode,” this is set to Disabled).
Note: Only applies to readers using Bluetooth communication
modes.
Also see registers: 73, 76
73
Auto Buffer Upload
1
0: Disable
1: Enable
When Enabled, the Reader will automatically upload buffered data
(i.e. storage that hasn’t been previously uploaded) whenever a
connection is present.
Note: Only applies to readers using Bluetooth communication
modes.
Also see registers: 72, 76
74
UPC Short Margin
1
0: Disabled
1: Enabled
Also see registers: 4D, 4E, 6A