Technical information

10/29/2014
Page 28 of 72
© 2014 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  [phone]  FAX [phone]
Reg
Setting Name
Default
(Hex)
Comment
41
Text Commands
8
Binary Dip Switch
Bit
Controls
Value
0
Text Commands
0: Disabled
1: Enabled
1
Suppress Echo
0: Disabled
1: Enabled
2
Suppress Responses
0: Disabled
1: Enabled
3
Disable Text Commands but
Enable Magic Sequence; See
Below
0: Disabled
1: Enabled
4
Suppress URL Decode; See
Below
0: Disabled
1: Enabled
5
Accept On Timeout
0: Disabled
1: Enabled
Magic Sequence:
The Magic Sequence is the string “;>PAx” where x is 1, 3, or 7 as
defined above. This would normally be used in command text files,
which would begin with the text-command-on sequence and end
with the command to return to this special mode. For example:
;>PA7
;any desired commands here
PA8
Suppress URL Decode:
For example, if enabled, P%418 will not equal PA8. The % is
not recognized as an escape character
Accept On Timeout:
Note: See register 156 for details