Technical information

10/29/2014
Page 27 of 72
© 2014 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  [phone]  FAX [phone]
Reg
Setting Name
Default
(Hex)
Comment
39
Trigger 1
3
The specified event is posted upon press of this button.
For the CR2600 and CR2300, trigger 1 is the button towards the
back on the top of the reader. For the CR3600, trigger 1 is the
button to the left of the center navigation buttons.
See the description for Register C4 for a list of valid events.
3A
Trigger 2
3
For the CR2600 and CR2300, trigger 2 is the button towards the
front on the top of the reader. For the CR3600, trigger 2 is the
button to the right of the center navigation buttons.
Also see register 39
3B
Trigger 3
0
The combination of pressing buttons defined by trigger 1 and
trigger 2 being pressed simultaneously.
Also see register 39
3C
Trigger 4
3
For the CR2600, CR2300, and CR3600, trigger 4 is the handle
trigger.
Also see register 39
3D
Trigger 5
0
The combination of pressing buttons defined by trigger 1 and
trigger 4 being pressed simultaneously.
Also see register 39
3E
Trigger 6
0
The combination of pressing buttons defined by trigger 2 and
trigger 4 being pressed simultaneously.
Also see register 39
3F
Trigger 7
0
The combination of pressing buttons defined by trigger 1, trigger 2
and trigger 4 being pressed simultaneously.
Also see register 39
40
Text Command Timeout
(ms)
2AF8
(#11000)
Valid Range: 0 to 7FFFFFFF Milliseconds
The maximum time during which a complete text command from
Host must be received. (Pending text command data is discarded
when the timeout is exceeded.)