Technical information

10/29/2014
Page 25 of 72
© 2014 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  [phone]  FAX [phone]
Reg
Setting Name
Default
(Hex)
Comment
2C
Active Mode
Countdown Timer (ms)
Bluetooth: Extra Cabled
Active Time Timer (ms)
2710
(#10000)
Valid Range: 0 to 7FFFFFFF Milliseconds.
This state: Active (Highest power usage)
Next state: Idle
Counts down to the end of Active Mode. To disable this timer, set
the register value to -1 as in the following example which disables
and saves the timer setting with the ‘C’ command:
C(2C)#-1
Active Mode is the time between the last user interaction with the
Reader (button press, etc.) or firmware interaction
(communications, etc) and the end of the Active Mode Countdown
Timer. There are many user and firmware events that will reset the
timer; therefore it may seem that the timer is longer than the value
set.
Bluetooth readers: This timer only applies if in the charging unit
and will get added to register 32 to get the time to idle state from
active mode.
Also see registers: 32, 88, 8E, 9F, 2C, 9E
2D
Keyboard Maps
0
0: US English (without leading 0 in the ALT + number)
1: ASCII (ALT+number) - universal
2: Custom (requires user to download keyboard map)
3: US English (with leading 0 in the ALT + number for non-printable
ASCII)
4: French Keyboard
5: German Keyboard
6: Japanese Keyboard
7: US English (with CTRL + char for non-printable ASCII)
8: Swiss Keyboard
9: Belgian Keyboard
A (#10): UK Keyboard
B (#11): Latin American Keyboard
Note: See 14 Appendix: Custom Keyboard XML File Formatting