Technical information

10/29/2014
Page 20 of 72
© 2014 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  [phone]  FAX [phone]
Reg
Setting Name
Default
(Hex)
Comment
0A
NEC 2 of 5 Symbology
0
Binary Dip Switch
Bit
Controls
Value
0
NEC 2 of 5 Decoding
0: Disabled
1: Enabled
1
Checksum checking
0: Disabled
1: Enabled
2
Strip checksum from the result
0: Disabled
1: Enabled
0B
Matrix 2 of 5 Symbology
0
Binary Dip Switch
Bit
Controls
Value
0
Matrix 2 of 5 Decoding
0: Disabled
1: Enabled
1
Checksum checking
0: Disabled
1: Enabled
2
Strip checksum from the result
0: Disabled
1: Enabled
0C
Telepen Symbology
0
0: Disabled
1: Enabled
0F
Targeting Contro
1
0: Targeting Disabled
1: Targeting Enabled
13
1D Barcode
Aggressiveness
0
0: Most Aggressive
1: Less Aggressive
2: Least Aggressive
Use this feature to minimize misreads on poorly printed 1D
barcodes
Note: This feature requires firmware 956+ and CD 13.2.x+.
14
Image Transform
0
0: No Transform
1: Mirror – Enables decoding of mirrored Data Matrix, QR, Han Xin,
and Aztec symbologies. Those symbologies must be enabled.
16
Data Matrix Rectangular
Symbology
1
0: Disabled
1: Enabled
Note: This register has no effect on a CR900FD without the proper
2D barcode decoding license.