User`s manual

Part 3
compatibles. The user may cut the 6 pin end and assemble this free end
according to his POS printer specification if the POS printer used
utilizes different connection. The cable connection on the wires is as
below:
Wire color
RJ45 Function
Red Pin 1 Drawer open sense
Blue Pin 2 Drawer open sense return
Green Pin 7 + 24V to solenoid
Yellow Pin 8 Drawer kick pulse
b). For CR4001/ 4101/ 4211/ 4002/ 4102/ 4212: 21863137210
/21863237210 with one 9PM and one 9PF connector.
c). For CR4003/ 4103/ 4213: 21863231810 with one 25PM and one 25PF
connector.
d). For CR4004/ 4104/ 4214/ 6214: The serial signal cable is already built
on.
e). For CR-4005-II/ 4105-II/ 4215-II/ 6215: USB cable is already built on.
6. Power Source depend on model
a). For CR-4000/ 4020/ 4100/ 4210/ 6210: not applicable
b). For CR-4001/ 4101/ 4211/ 4002/ 4102/ 4212/ 4003/ 4103/ 4213/
CR4005-II / 4105-II/ 4215-II/ 6215: Power adapter 12VAC 1.5A
c). For CR4004/ 4104/ 4214/ 6214: Power connector cable and I/O
bracket plate.
INSTALLATION
CR4000 / 4020 / 4100 / 4210 / 6210 Connect the drawer to POS
system/printer as shown below:
CASH DRAWER
With Printer Interface
8P Telephone Jack
8P Telephone Plug
6P Telephone Plug
Output to drawer
POS System or Printer
Ground
Rear View
Control signal input