User`s manual
Part 10
to the normal display mode.
In case the cash drawer is connected to serial port other than COM1 please
substitute COM1 above to proper port name.
If the pre-set security code of CR-4002/ 4102/ 4212 has been changed from
default 07 Hex. Please change the CTRL-G above accordingly. For CR4001/
4101/ 4211/ 4004/ 4104/ 4214/ 6214, this code can be replaced by any
character.
CR-4003 / 4103 / 4213
1. Under DOS prompt, type “TYPE CON>LPT1”. Hit the ENTER key.
2. Type “CTRL-G” (Press Ctrl and G keys together). Hit the ENTER key,
then the drawer will open.
3. Hit CTRL-C (Press Ctrl and C keys together) to return the computer
back to the normal display mode.
If the pre-set security code of CR-4003/ 4103/ 4213 has been changed from
default 07 Hex. Please change the CTRL-G above accordingly.
CR4005-II/ 4105-II/ 4215-II / 6215
1. Please find in Posiflex Product Information CDROM or go to Posiflex
web sites (http: //www.posiflex.com.tw or //www.posiflextw.com or
//www.posiflexusa.com) for USB Cash Drawer Test Program. If you use
the Posiflex Product Information CDROM that comes with any Posiflex
POS system, please go to folder “\Drivers\CR\USB” and click
“SETUP.EXE” to install the USB Cash Drawer Test Program.
2. Start up the test program and click “STATUS” button. The drawer status
of Open/Close or Not present will be displayed under each drawer
number as “O”, “C” or “N”
3. Use a key to turn the lock to standby position (the one marked with sign
at middle), click the check only the box(es) under the drawer number(s)
for the drawer(s) to be tested then click the “KICK” button.
4. The cash drawer will then open and the Open/Close/Not present status of
the tested drawer number will be renewed accordingly. If these status are
correct, the USB interface cash drawer passes the test
警告使用者
這是甲類的資訊產品,
在居住的環
境中使用時,
可能會造成射頻干
擾,在這種情況下,
使用者會被要
求採取某些適當的對策。
T31454