User`s manual

NOTE

The KEYBOARD AUTO CAPS/NUM LOCK option is

NOT effective on some computers, such as XT's.

Indications that this option is NOT functioning are as

follows:

Upper/Lower Case are reversed.

SPECIAL KEY characters are not transmitted

when SPECIAL KEYS are ON.

If KEYBOARD AUTO CAPS/NUM LOCK is NOT oper-

ating properly on your system, take the following steps:

Set KEYBOARD AUTO CAPS/NUM LOCK to

OFF.

Set KEYBOARD CAPS LOCK STATUS. (See

option (2).)

Set KEYBOARD NUM LOCK STATUS. (See

option (3).)

6) ALTERNATE KEYBOARD SCAN CODES

This option is necessary ONLY for computers that use SCAN

CODE Set 3. Note that it might be necessary to disable option

(5), KEYBOARD AUTO CAPS/NUM LOCK.

ON Enable ALTERNATE KEYBOARD SCAN CODES.

OFF * Disable ALTERNATE KEYBOARD SCAN CODES.

7) TERM CHAR OVERRIDE

ON If any control character or special character (ie.,

function key, arrow key, etc...) is embedded in the bar

code data, the TERMINATION CHARACTER, the

PREAMBLE, and the POSTAMBLE will not be

transmitted.

OFF * The TERMINATION CHARACTER, the PREAMBLE,

and the POSTAMBLE will be transmitted with all bar

code data.

8) READ REVERSE IMAGE BAR CODES

ON Enable reading of Reverse Image (negative image)

bar codes.

OFF * Disable the reading of Reverse Image (negative

image) bar codes.