User`s manual

OTHER OPTIONS

0) SEND BAR CODE TYPE ID

ON Transmit the bar code identifier character at the

beginning of the bar code data. There is one space

between the ID character and the bar code data. The

identifier characters are defined below:

A CODE 39

B UPC-A

C UPC-E

D EAN-13

E EAN-8

F INTERLEAVED 2 of 5

OFF * Do not transmit BAR CODE TYPE ID.

1) FUNCTION KEYS

ON Applies to bar code data, preambles, postambles,

and user defined termination characters. FUNCTION

KEYS F1 through F10 will be transmitted in place of

the ASCII characters "DC1" (11H) through "SUB"

(1AH). The FUNCTION KEY values are listed in the

Full ASCII Chart on back of the MENU, and in

Appendix A.

OFF * Disable FUNCTION KEYS.

(Standard ASCII characters are transmitted.)

NOTE: See option (4) for a related example.

2) KEYBOARD CAPS LOCK STATUS

Setting this function is necessary

only if option (5),

KEYBOARD AUTO CAPS/NUM LOCK, does not operate on

your computer. See option (5) to determine whether

KEYBOARD CAPS LOCK STATUS is required.

To use this option, scan either ON or OFF to match the

computer keyboard's CAPS LOCK status.

ON * Scan ON to indicate that the keyboard's CAPS

LOCK is turned ON. The result is lower case

Alpha characters being output as Shifted

characters.

OFF Scan OFF to indicate that the keyboard's CAPS

LOCK is turned OFF. The result is upper case

Alpha characters being output as Shifted

characters.

G CODABAR

H CODE 128

I CODE 93

J MSI/PLESSEY

K CODE 11