User`s manual

CODE 39

0) CODE 39 DECODER

ON * Enable reading CODE 39 labels.

OFF Disable reading CODE 39 labels.

1) FULL ASCII

ON Enable the FULL ASCII EXTENSION to CODE 39.

Option (0) above must be ON. A Full ASCII Chart is

provided in Appendix C.

OFF * Disable the FULL ASCII EXTENSION to CODE 39.

This sets the reader to the standard CODE 39 mode.

2) MOD 43 CHECK DIGIT

ON Enable the MOD 43 CHECK DIGIT for CODE 39.

When this option is enabled, only CODE 39 labels

that contain a valid check digit will be read.

OFF * Disable the MODE 43 CHECK DIGIT. Check digit

verification will not be performed.

3) SEND CHECK DIGIT

ON Transmit the MOD 43 CHECK DIGIT with the bar

code data. Requires option (2) above to be ON.

OFF * Do not transmit the MOD 43 CHECK DIGIT.

4) CONCATENATE MODE

ON Enable CONCATENATE MODE. The concatenate

mode allows the reader to accumulate multiple bar

codes in its buffer, then send them to the computer

just like they were a single bar code. When a Code

39 label containing a leading space is read, the

reader emits two short beeps and buffers the data

without transmission. This process continues until a

Code 39 label without a leading space is read or 128

characters are buffered. A Code 39 bar code label

that only contains a single or multiple dashes (minus

sign) will clear the buffer.

OFF * Disable CONCATENATE MODE.

* NOTE: Defaults are marked with " * ".