Operating instructions

Operating Instructions Chapter 8

CLV63x Bar Code Scanner

Maintenance

Fig. 8-1: Cleaning the reading window

If the reading window is scratched or damaged (cracked, broken), it must be replaced.

Please contact the SICK Service.

8.2.2 Cleaning the housing

¾ Use a soft cloth to free the housing of dust.

¾ If necessary, also clean the LEDs on the housing.

8.3 Cleaning further optical effective surfaces

Depending on the reading system equipment, additional external sensors with optical effec-

tive surfaces can be installed (e.g. photoelectric reflex switch for external reading pulsing).

Soiling of these sensors can cause incorrect switching behaviour.

¾ In order to prevent incorrect switching behaviour, remove soiling from the optical effec-

tive surfaces of the external sensors.

Fig. 8-2: Cleaning of the external optical sensors (reading pulse generator)