Operating instructions

Chapter 3 Operating Instructions

CLV63x Bar Code Scanner

Quick-Start

3.3 Performing the reading

Fig. 3-1: Register tab Quickstart

Perform the reading:

1. Ensure that the relevant code types are activated on the register tab.

2. Carry out a test reading with a test bar code.

To achieve this, hold an object with a bar code in front of the bar code scanner's reading

window and trigger the reading by clicking S

TART. The default setting of the focus posi-

tion is 285 mm (11.2 in). If necessary, observe the bar code scanner's depth of fields

ranges in relation to the resolution (see chapter 10.3 Specification diagrams,

page 80).

During reading operation and with default settings, the line scanner with oscillating mir-

ror deflects the scanning line by the central position with a frequency of 1 Hz and at a

max. angle of ± 20°.

The reading result is displayed in the B

ARCODE CONTENT display field.

The code reading reliability is specified in the relevant display field.

Note

With the SOPAS-ET configuration software, the QUICKSTART register tab contains the most im-

portant reading parameters for configuring and performing a bar code reading:

ROJECT TREE, CLV63X, QUICKSTART register tab