User's Manual

C007964_04_CR2600_User_Manual
Fuel Gauge Buon
5.0 - Fuel Gauge Baery Status Indicators
Check the Baery Life
Press the fuel gauge buon(Figure 13) to determine remaining baery life. If the baery has less then 10% capacity, the rst LED will
ash rapidly. For 25% or greater capacity, the LEDs will ash ON for 4 seconds.
3
Fuel Gauge Status Indicator While Charging
If the baery has less then 10% capacity, the rst LED will ash rapidly while charging. For 25% or greater capacity, the LEDs will
ash ON for 4 seconds.
Fuel Gauge Indicators
6.0 - Powering On/O the Reader
Press and hold either the buons or trigger (Figures 15 and 16), for one second, to power on reader. The CR2600 will beep, vibrate and
the LEDs will ash to indicate it is on and ready for use.
Baery Life Fuel Gauge Indicators
<10%
(Flashes Rapidly)
<25%
25-50%
50-75%
75%+
Figure 13
Figure 14
Figure 15 Figure 16
7.0 - Targeng the CR2600
Press and hold one of the buons or trigger on the CR2600, the two blue bars eming from the reader (Figure 17) are used for
targeng. Center the blue bars in the middle of a bar code. The opmal reading distance from reader to bar code is approximately
4.0” (10 cm). Once the reader is at the opmal distance, the reader will automacally read the bar code.
The CR2600 will beep, vibrate and the good read indicator (Figure 22) will ash green
to indicate a ‘good read’ has occurred.
Figure 17