User's Manual

D013597_1.0_CR3600_User_Manual
Fuel Gauge Buon
5.0 - Fuel Gauge Baery Status Indicators
Check the Baery Life
Press the fuel gauge buon (Figure 12) to determine remaining baery life. If the baery has less then 10% capacity, the rst LED will
ash rapidly. For 25% or greater capacity, the LEDs will ash ON for 4 seconds.
3
Fuel Gauge Status Indicator While Charging
If the baery has less then 10% capacity, the rst LED will ash rapidly while charging. For 25% or greater capacity, the LEDs will
ash ON for 4 seconds.
Fuel Gauge Indicators
6.0 - Powering On/O the Reader
Press and hold either buon located on the right or le of the arrow keys, or the trigger on handled conguraons (Figures 14 and 15),
for one second, to power on reader. The CR3600 will beep, vibrate and the LEDs will ash to indicate it is on and ready for use.
Baery Life Fuel Gauge Indicators
<10%
(Flashes Rapidly)
<25%
25-50%
50-75%
75%+
Figure 12
Figure 13
Figure 14
Figure 15
7.0 - Targeng the CR3600
Press and hold either buon located on the right or le of the arrow keys, or the trigger on handled conguraons of the CR3600,
the two blue bars eming from the reader (Figure 16) are used for targeng. Center the blue bars in the middle of a barcode. The
opmal reading distance from reader to barcode is approximately 4.0” (10 cm). Once the reader is at the opmal distance, the
reader will automacally read the barcode.
The CR3600 will beep, vibrate and the good read indicator (Figure 21) will ash green
to indicate a ‘good read’ has occurred.
Figure 16