User's Manual

D013597_1.0_CR3600_User_Manual
3.0 - Baery Installaon and Removal
Place the baery into the reader as shown below. Once in place, the baery will snap and lock to indicate proper installaon. For
baery removal, slide the latch (Figure 8), to unlock and release the baery.
Latch
4.0 - Charging the CR3600
1. Plug the USB cable into the computer’s USB port (Figure 9) or the power adapter into the wall outlet (Figure 10).
2. Remove the plasc ‘Remove Before Use’ cap and place the reader into the Charging Staon (Figure 11).
Note: Baeries ships with approximately 50% bat-
tery life and should be completely charged before
inial use. Approximate me to charge a depleted
baery is 4 hours via USB cable, and 2 1/2 hours via
AC power supply.
2
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11