User's Manual

D013597_1.0_CR3600_User_Manual

9.0 - Communicaon Mode Switch

Charging Staons with an embedded modem feature a Communicaon Modem Switch. The

Communicaon Mode Switch allows the reader to transmit data through either the modem or wired

connecon.

When the Communicaon Mode Switch is moved to the right, in the direcon of the arrow, the reader will

communicate via the modem. The QuickConnect code located on the front of the Charging Staon must

be scanned to establish a Bluetooth connecon. Scanned data will then be transmied to the host device

wirelessly.

If a wired connecon is needed, move the Communicaon Mode Switch to the le. For USB Downloader

or Keyboard mode, the Batch Mode Enable code must be scanned (refer to Secon 10). To transmit

scanned data while in wired mode, the reader must be placed into the Charging Staon before data can be

transmied to the host device.

10.0 - Communicang in USB Downloader (HID) Mode

CR3600 rmware and conguraon sengs can be managed via USB Downloader (HID) Mode using Code’s CortexTools™.

To communicate in USB Downloader (HID) Mode with a CR3600 and Charging Staon, skip step 1 and proceed to step 2.

For the CR3600 to communicate in wired, USB Downloader (HID) Mode with a Charging Staon with embedded CodeXML®

modem:

1. Move the Communicaon Mode Switch to the le (opposite direcon of the arrow) on the Charging Staon (Figure 18).

2. Open CortexTools™. (Contact appeng@codecorp.com for a CR3600 compable version)

3. Scan the USB Downloader (HID) Mode conguraon barcode.

4. Dock the reader into the Charging Staon.

5. Follow the instrucons detailed in the CortexTools™ User Manual, available from

www.codecorp.com.

USB Downloader (HID) Mode

conguraon code

Communicaon

Mode Switch

The CR3600 can be congured for Batch Mode to capture and transmit data via USB Communicaon Modes. To communicate in

USB Downloader (HID) Mode with a CR3600 and Charging Staon, skip step 1 and proceed to step 2.

For the CR3600 to communicate in wired, USB Downloader (HID) Mode with a Charging Staon with embedded CodeXML®

modem:

1. Move the Communicaon Mode Switch to the le (opposite direcon of the arrow) on the Charging Staon (Figure 18).

11.0 - Communicang in Batch Mode via USB Communicaon Mode