User's Manual

6
D021992_03 CR5000 User Manual
4.0 - CRA-T500 Bluetooth Set Up
2x
1
2
3
Bluetooth Settings
Scanning for devices...
The CRA-T500 cable has an embedded Bluetooth module that allows the CR5000 to connect to a tablet, smartphone, or other Bluetooth-enabled device.
When the CR5000 is rst taken out of the box, plugged into the CRA-T500, and powered up, the Bluetooth module will be in discoverable mode, which
means a host Bluetooth device may pair with the CR5000 by choosing “Code T500” from the list of available devices shown in the host device’s Bluetooth
menu (typically under “Sengs”, but varies by device).
By default, the CR5000 will connect using the HID Keyboard communicaon protocol. This will send scanned data to the applicaon that has focus on the
host device as if the user was typing the data with a keyboard. The communicaon protocol can be changed using the conguraon codes located at
www.codecorp.com/congguide.
For ghter integraon with iOS applicaons, an SDK is available on the Code website at www.codecorp.com/downloads.php.
Bluetooth Settings
Available Devices
Code T500 Tap to Pair