User's Manual

www.codecorp.com
Quickstart Guide
CR2600 Mountable Palm Cart Charger
C008950_01_A111_QuickStart_Guide
The CR2600 Mountable Palm Cart Charger is designed for easy
mobile cart integraon. The embedded CodeXML® Modem
enables a CR2600 reader to wirelessly transmit, through a
Bluetooth® connecon, data to a host device.
In addion, the Mountable Palm Cart Charger charges a
wireless palm CR2600 while posioning it within easy
reach for retrieval.
Aach the micro-USB cable provided to the CR2600 Mountable Palm Cart Charger (Figure 2),
and plug the USB connector into the USB port on the computer (Figure 3). Once plugged in the
charging status LED will ash red (Figure 6).
4
Installation
Figure 1
The Code Reader™ 2600 (CR2600) has been tested for compliance with FCC regulaons and was found to be compliant with all applicable FCC
Rules and Regulaons.
FCC ID: QQ6-BTA01
IC ID: 9966A-BTA01
Model #: CRA-A111_01
This device complies with part 15 of the FCC rules. Operaon is subject to the following two condions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon. Any
changes or modicaons not expressly approved by manufacturer could void the user’s authority to operate the equipment.
IMPORTANT! Any changes or modicaons not expressly approved by the party responsible for compliance could void the user’s authority to
operate this equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is subject to the following two condions: (1) this device
may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operaon of the
device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitaon est autorisée
aux deux condions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’ulisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, meme si le brouillage est suscepble d’en compromere le fonconnement.
IMPORTANT! Tous les changements ou modicaons pas expressément approuvés par la pare responsable de la conformité ont pu vider
l’autorité de l’ulisateur pour aconer cet équipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference
to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does
cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada
US Patent: www.codecorp.com/legal/patents.php
Operang Temperature: -20° to 55° C / -4° to 131° F
Important Note:
Included
Micro-USB to USB Cable
Figure 2 Figure 3
CR2600 Mountable
Palm Cart Charger
Page Button
The CR2600 Mountable Palm Cart Charger is equipped with
a page buon. To locate a CR2600 that has a connecon
established to the modem, and is within Bluetooth range,
simply press the Page buon on the Charger. The reader will
then beep.
© 2014. Code Corporaon. All Rights Reserved.
Page Buon
Note: Two M4 Phillips pan
head X 6mm threaded length
screws are included for
installaon.
Two M4 Phillips pan head screws are included with each CRA-A111. The screws are designed to
t into the threaded brass inserts (Figure 4) found on the back of the charger. Insert and ghten
the screws prior to, or aer they are in the posion to the mounng bracket. Once mounted,
ghten each screw to ensure the charger is securely aached to the mounng bracket.
Figure 4