User's Manual

English (Default) Universal French German
Non-printable ASCII
Keyboard (Crtl + character)
Japanese Non-printable ASCII Keyboard
(No Leading 0)
Keyboard Input (USB)
The modem is defaulted to English language keyboards. If you need to communicate in a
dierent language requiring a change in keyboard sengs, please scan the appropriate
conguraon barcode below, aer connecng to the modem:
2
3
Once connected, the reader will beep once as
conrmaon and the modem’s blue LED light will
become solid (Figure 6). If the reader does not connect,
the reader will beep four mes in rapid succession.
Figure 6
Establishing a Bluetooth® Connecon
Charging a CR2600
A red LED = reader/baery is charging
A green LED = reader/baery is fully charged*
*Note: In certain reader conguraons, the radio is required
to always be on, therefore requiring a constant power draw. In
these instances, while the power draw is minimal, the LED light
may never turn green when charging a baery aached to a
reader.
The CR2600 Mountable Palm Cart Charger has an LED to indicate the charging status of reader.
Press either trigger buon on the CR2600 and scan
the QuickConnect barcode located on the Mountable
Palm Cart Charger to establish a Bluetooth connecon
between the CR2600 and the computer that the Charger
is connected to. (Figure 5)
Figure 5
Charging Status LED
Place a CR2600 into the charging bay of the Mountable Palm
Cart Charger, facing forward, and down (Figure 7), making sure
it is seated rmly into place. Once the charging clips have made
contact with the connectors on the reader the charging status LED
will light up.
Note: Baery ships with approximately 50% baery life. Fully
charge baery before use. Approximate charge me is 4 hours.
Figure 7
Figure 8
Charging Status LED
CodeXML® Modem Status LED
Charging Status LED
Trigger Buons
Refer to CR2600 Quick Start Guide and Product Manual for reader specicaons.