USER MANUAL NORTH AMERICA: ENGLISH CR4405 Compatible with Apple iPhone 5 and 5s ® ® MANUAL VERSION 02 RELEASE DATE: JANUARY 2015 www.codecorp.com Apple and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Configuration Guide YouTube.
Statement of Agency Compliance The Code Reader™ 4405 (CR4405) has been tested for compliance with FCC regulations and was found to be compliant with all applicable FCC Rules and Regulations. IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, this device must not be co-located or operate in conjunction with any other antenna or transmitter.
Code Reader™ 4405 User Manual Copyright © 2015 Code Corporation. All Rights Reserved. The software described in this manual may only be used in accordance with the terms of its license agreement. No part of this publication may be reproduced in any form or by any means without written permission from Code Corporation. This includes electronic or mechanical means such as photocopying or recording in information storage and retrieval systems. NO WARRANTY. This technical documentation is provided AS-IS.
Table of Contents 1.0 - Included if Ordered...................................................................................... 5 2.0 - Battery Installation and Removal................................................................... 6 3.0 - Phone Installation........................................................................................ 6 4.0 - Charging the CR4405 Sled and Spare Battery................................................ 7 5.0 - USB Direct Connection to Sled.......................
1.0 - Included if Ordered USB 2.
2.0 - Battery Installation and Removal 1 Insert Battery 1 Remove Torx Screw from Latch 2 Secure Latch with Torx Screw 2 Turn Latch and Remove Battery 3.
4.0 - Charging the CR4405 Sled and Spare Battery = = 4 Hrs. Hrs. Sled Battery Status While Charging Sled LED Behavior 100% - 96% Solid Green 95% - 31% Flashes Green 30% - 11% Flashes Yellow 10% - 0% Flashes Red Note: Charge battery fully before use. 5.0 - USB Direct Connection to Sled 6.
7.0 - Sled Battery Status Indication Sled Battery Status While Not Charging Sled LED Behavior (when scan button is pressed) 100% - 31% None 30% - 11% Flashes Yellow 3x 10% - 0% Flashes Red 3x 8.0 - Scanning 10 cm 9.0 - Symbologies Defaulted On 10.0 - Symbologies Defaulted Off The following are symbologies that have a default of ON. To turn symbologies on or off, scan the symbology barcodes located in the CR4405 Configuration Guide on our website at http://www.codecorp.com.
11.0 - Reading Ranges CR4405 Performance Test Barcode Min Inches (mm) Max Inches (mm) 3 mil Code 39 3.1” (80 mm) 4.0” (102 mm) 7.5 mil Code 39 1.3” (33 mm) 7.2” (182 mm) 10.5 mil GS1 DataBar 0.8” (20 mm) 8.7” (220 mm) 13 mil UPC 1.1” (28 mm) 11.0” (280 mm) 4.2 mil Data Matrix 1.9” (48 mm) 4.3” (110 mm) 5 mil Data Matrix 1.7” (43 mm) 4.5” (115 mm) 6.3 mil Data Matrix 1.3” (33 mm) 5.9” (150 mm) 10 mil Data Matrix 0.8” (20 mm) 7.1” (180 mm) 20.8 mil Data Matrix 1.1” (28 mm) 13.
13.0 - CR4405 Communication Modes The CR4405 has four communication modes, with an associated configuration barcode by the same name in the CR4405 Configuration Guide. Communication Mode Description iPhone Keyboard Communication Mode (default) This mode allows you to scan data into an iPhone 5/5s application like Notes or a spreadsheet, as if you were manually entering in data (e.g. from the on-screen keyboard).
16.0 - Using CortexMobile™ CortexMobile™ is an iPhone 5/5s software application developed by Code to demonstrate the capabilities of the CR4405. This software app can serve as a reference for programmers who use Code’s SDK to build other apps which can be downloaded to the iPhone from the App Store. The sled must be in iPhone App Communication Mode to run Code SDK-based applications.
17.0 - CortexMobile™ Used for Demonstration A default time of 1 minute is set for sled inactivity before going to sleep. Activating CortexMobile™ disables sleep. The next time the sled reboots, the sleep timer setting reverts to its default value. 18.0 - Battery Life Management via the SDK Power consumption generally depends on scanner and iPhone usage.
19.0 - CR4405 Dimensions 6.25" (156 mm) 2.8" 1.25" (75 mm) (30 mm) 20.0 - Charging Station Dimensions 4.6" 2.7" (69 mm) (117 mm) 4.
21.0 - Reader ID and Firmware Version To find out the Reader ID and Firmware version, open a text editor program (i.e., Notepad, Microsoft Word, etc.) and read the Reader ID and Firmware configuration barcode. Reader ID and Firmware A text string indicating the firmware version and CR4405 ID number will be displayed. xample: Xap/i06760456none0020094903A0600000070007001600620002 ○ cd(13.2.
23.0 - CR4405 Maintentance The CR4405 needs only minimum maintenance to operate. The tips below for maintenance suggestions. Enhancing the CR4405’s Touchscreen Capacitive Cover The CR4405 contains a transparent capacitive cover that helps protect the iPhone and seals out moisture and debris. The cover is resistant to abrasion, corrosion, thermal exposure and impact. A scratch resistant material is also applied to both sides of the cover during the manufacturing process.
24.0 - Warranty* Non Warranty Repairs Code warrants its repair/replacement services for ninety (90) days from the date of shipment of the repaired/replacement product to the Customer. This warranty applies to repairs and replacements for: i) damage excluded from the limited warranty described above; and ii) Code Products on which the limited warranty described above has expired (or will expire within such ninety (90) day warranty period).
