User's Manual

6
Automatic Convenience Options
The Power Elite PC 4100
TM
performs a variety of automatic functions
to enhance security and comfort. Some of these features are programmable
at the time of installation. Please see your installer for further details.
Automatic Arming
The Power Elite PC 4100
TM
will arm automatically 1 minute after the
key is removed from the ignition. This feature can be temporarily
disabled by placing the system into Valet mode.
Ignition Lock
If all doors are closed and the vehicle is started with the key, the doors
will automatically lock.
Ignition Unlock
When removing the key from the ignition, the doors will automatically
unlock.
When Your Security System is Triggered
The Power Elite PC 4100
TM
will trigger if one of the following events
occurs while the system is armed:
• Any protected entrance is opened
• The vehicle ignition is turned on
• The vehicle is jolted hard enough to signal the impact detector
Once the alarm is triggered, the horn sounds and the vehicle
parking lights flash for 30 seconds. The system will then re-arm,
awaiting the next intrusion attempt. To stop the horn while
keeping the alarm armed and doors locked: press the ARM
button while the system is triggered.
The Interior Status Indicator
The Status Indicator is a high-intensity red light mounted in a visible
location on the vehicle dashboard. This red light gives a visual
indication of the alarm system’s state of operation. Note the chart
below:
If the Status Indicator is... ....then the Security System
Off is disarmed
Flashing Slowly is armed
Flashing Very Quickly was triggered in your absence
(see Attempted Intrusion ID - page 4)
Flashing Intermittently is in Valet mode
(2 flashes, off, 2 flashes)
On (not flashing) is in Pre-arm mode