User's Manual

OCT/02/2002
CA-120
9
F. ACTIVE ARMING – LOCK & ARM :
1. Press
button on transmitter.
2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The
vehicle doors will lock upon arming when interfaced with the security system.
Note: Defective sensor reminder: If the siren sounds 3 chirps, then you have left a door, trunk, or hood
lid ajar. (See Feature “I -
3 Programming)
SILENT ARMING / DISARMING:
Press the
+ button together on the transmitter will arm or
disarm your security system, No chirp sound will be heard, arm / disarm confirmation will be through the
vehicles parking lights only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Press the button on the transmitter twice within
3 seconds will arm the security system, by-pass the shock sensor and the optional sensor connected to 4
pin plug. The system will chirp one additional time to confirm the sensor bypass mode was activated. The
sensor bypass feature is programmed to activate for one arming cycle only. The security system will return
to normal operation during the next arming cycle.
G. PASSIVE ARMING : (See Feature “II -
2” Programming)
Active arming / disarming is controlling your security system via the remote transmitter. This security
system is equipped with an optional Passive Arming feature, which allows the security system to arm 30
seconds after the last door is closed. Operation is as follows.
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any
door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once the
vehicle all entrances are closed.
3. After 30-second timer has elapsed, the security system will automatically “ARM”. The siren will chirp [1]
time and the parking lights will flash [1] time.
PASSIVE DOOR LOCKING: (See Feature “II
-
2” Programming)
The vehicle doors will automatically lock after passive arming cycle has been completed.
H. ACTIVE DISARMING – UNLOCK & DISARM :
1. Press the
button on the transmitter.
2. The siren will chirp twice and parking light will flash twice to indicating that the security system is now
disarmed. The vehicle doors will unlock disarming when interfaced with the security system.
TAMPER DISARMING: If alarm triggered, upon disarm the system, siren chirp 4 times, parking light flash
3 times.
TWO STEP DOOR UNLOCK: (See Feature III – 2 Programming.) This feature will independently unlock
the drives door only when disarming the security system. Pushing the
button on the transmitter a
second time within 3 seconds will unlock the entire vehicle.
AUTOMATIC RE-ARM (See Feature “I
-
2” Programming): If this feature is selected, the security system
will automatically re-arm itself 60 seconds after disarming with remote transmitter. Automatic rearm will
cancel if any door is opened before the 60 seconds timer has elapsed.