User's Manual

OCT/02/2002
CA-120
7
2
Automatic Rearm On Automatic Rearm Off
3 With Door Ajar error chirp.
Bypass Door Ajar error chirp
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps to confirm exit.
ALARM FEATURE “
II
” PRORAMMING:
1 Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2 Push the Valet switch 4 times and hold it until two chirps with a long chirp is hearing then release the
valet switch. You are now in the Alarm feature ‘II’ programming mode.
3 Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
Press
Transmitter
Button
One Chirp /
LED one pulse
Factory Default Setting
Two Chirps /
LED two pulse
Three Chirps /
LED three pulse
1 0.9-second Door lock
pulses.
3.0-second Door lock
pulse.
Double pulse unlock
2
Active arming Passive arming without
passive door locking
Passive arming with
passive door locking.
3 Ignition controlled door locks
& unlocks
Without ignition controlled
door locks & unlocks
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps to confirm exit.
ALARM FEATURE “III” PRORAMMING:
1 Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2 Push the Valet switch 6 times and hold it until three chirps with a long chirp is hearing then release the
valet switch. You are now in the Alarm feature ‘III’ programming mode.
3 Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
Press
Transmitter
Button
One Chirp /
LED one pulse
Factory Default Setting
Two Chirps /
LED two pulse
Three Chirps /
LED three pulse
1 H1/5 Brown Wire = Siren
Output
H1/5 Brown Wire = Horn
Output
2
H7/6 Gray Wire = Trunk
(Channel 3) Output
H7/6 Gray Wire = Two
Step Door Unlock Output
H7/6 Gray Wire = Pager
Output
3 Car Jacking Off Car Jacking On
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps to confirm exit.
OPERATION MANUAL
A. TRANSMITTER OPERATION :
Transmitter Button System Function Remark