User's Manual

OCT/02/2002

CA-120

Warning: If you don't need the car jacking function in this alarm system, be sure to set car jacking feature

“OFF”. This system is default setting car-jacking “OFF”. (See Alarm Feature III - 3 Programming.)

1. TRANSMITTER ACTIVATE THE CAR JACKING:

Press and hold the transmitter

and button at the same time for 1 seconds while the vehicle’s

ignition is “ON”. The parking lights will turn on for 1.5 seconds to indicate car jacking activated.

2. DOOR SWITCH ACTIVATE CAR JACKING:

1. Turn the ignition switch to “ON” position, the system is armed.

1. Once the system is armed, If you are forced from the vehicle, the system will active the car jacking

trigger when the door is opened and closed while the ignition is “ON”.

TRIGGER THE CAR JACK MODE:

3-timer circuits will function as follows:

First timer: a. 50 seconds after the system has been triggered. The siren will start chirping for 15 seconds.

b. During this 15 seconds period of chirping, you will be alerting to push the valet switch once

to turn off the car-jacking feature.

c. If not, it will enter second timer car jacking.

Second timer: 65 seconds after the system has been triggered. The siren starts alarming and the parking

light starts flashing.

Third timer: 90 seconds after the system has been triggered

a. The siren still alarming and the parking light flashing, and

b. The starter disable will activate to prevent the vehicle from starting.

c. It will remain active until the vehicle's battery power exhausted.

OVERRIDE THE SYSTEM TO TURN OFF CAT JACKING:

Turn the ignition switch from OFF to ON, and within 10 seconds push valet switch, the siren will stop and

the system disarmed

O. IGNITION CONTROL DOOR LOCKS : (See Feature II – 3 Programming.).

If the vehicles door locks have been interfaced to the security system, the system will automatically lock

the vehicle's doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition is

turned “OFF”.

P. TRUNK RELEASE : (See Feature III – 2 Programming.).

Press and hold

button on transmitter for two seconds to remote control the trunk release or other

electric devices.

Q. CAR LOCATOR :

Press the button on the transmitter to active car locator function. The siren will chirp 6 times. The

parking light will flash 12 times, for you to easily locate your car.